Search

FEATURES KOREA MATERIAL DEVELOPMENT

    ATTRITION MILL

    attrition mill can be ground by dry or wet method, and can mix and disperse powders within a short period of time.
    It is easy to adjust the grinding speed according to the use of the grinded material and easy to discharge slurry and media.
    Depending on the ingredients of the grinded material, grinding tank and impeller can be selected and used, and the Tank and Impeller are designed to be easily replaced.
    Depending on the grinding conditions, it is possible to grind up to 0.1 μ or less.

    ATTRITION MILL (BATCH TYPE)

    FEATURES
    - Grinding of hard materials such as ceramics, glass, metal powders, ferrites, carbides, cemented carbides, etc
    - Grinding and dispersion of industrial coating materials, ink paints and paper coatings
    - Grinding and dispersion of medicines
    - Grinding and dispersion of electronic functional ceramics
    - Grinding and dispersion of snacks and other foods
    - Grinding and dispersion of rubber, plastic fillers

    ATTRITION MILL (CIRCULATION TYPE)

    FEATURES
    - High energy efficiency
    - The grinding speed is fast due to fast slurry pumping and the range of particle size distribution is SHARP
    - Low media consumption compared to large amount of pulverization.
    - Continuous slurry status can be detected during grinding and additional elements can be freely participated in the holding tank
    - The temperature of the grinding tank and the holding tank can be controlled by jacket
    - Can be grinded up to 0.1μ or less depending on the grinding conditions
    - Uniform dispersion in a short period of time